Amateur RC helicopter flying Extreme SS1 - CV from 7-11 $40 toy Just reviewing this copter. Filmed with an iPhone 4s so video quality is wha...
Amateur RC helicopter flying Extreme SS1 - CV from 7-11 $40 toy Just reviewing this copter. Filmed with an iPhone 4s so video quality is what it is. Enjoy. Less
Footage of the Pahar Trust Golf Day - Open 3. Shot using a Quad Copter mounted with a Go Pro Hero 3.
Need aerial video with your gopro? All you need is a fishing rod, some helium balloons, and a camera! Took about 40 party balloons to lift m...
Need aerial video with your gopro? All you need is a fishing rod, some helium balloons, and a camera! Took about 40 party balloons to lift my gopro... You don't need a quad-copter to get... Less
In this episode I go through the thirty-ninth mission in the game. Reni asks Vic to meet Gonzalez at the Downtown jetty, and after the two m...
In this episode I go through the thirty-ninth mission in the game. Reni asks Vic to meet Gonzalez at the Downtown jetty, and after the two men are acquainted he asks Vic to fly his copter to... Less
www.weliveunbound.comnFB » facebook.com/LiveUnbound // IG » @weliveunbound // Subscribe » weliveunbound.com/subscribennThis film is based...
www.weliveunbound.comnFB » facebook.com/LiveUnbound // IG » @weliveunbound // Subscribe » weliveunbound.com/subscribennThis film is based on Dan Brodsky-Chenfeld’s book “Above All Else” which you can buy here » http://amzn.to/1QtmNPv. Also check out his site » http://danbrodsky-chenfeld.comnnFor screening info or business inquires email » yalisharon@gmail.comnnAt Live Unbound we believe in pushing yourself to be greater through what you love and doing whatever it takes to overcome mental and physical constraints. Once in awhile we come across a real life story that embodies this message. A story of falling madly in love with your dream. Then using that passion to overcome the massive obstacles that appear in the journey of realizing it. This is that story. nnThis documentary was made possible by Frank Casares who believed in us and funded the project. We had a small crew of 5 people and shot on a RED epic, RED dragon, 5D Mark ii and the Inspire Copter. The biggest challenge was the slow motion skydiving scene which was filmed by Craig O’Brien. Those were shot on the RED dragon at 200 fps. Due to wind, we only had 4 jumps to make it happen but Craig and skydivers Brad Patterson and Dalten Kadow nailed it. nnCurrently we’re searching for the next great story to tell. We encourage people to reach out to us if they have one or know somebody who does. nnThanks for watching!nnExecutive ProducernFrank CasaresnnDirected and Edited by nYali SharonnnDirector of PhotographynEric GillespiennAerial CinematographernCraig O’BriennnCamera OperatorsnNorman KentnRichard StuartnJohn LemingnKylor MeltonnGeoffrey BoyntonnnProducersnYali SharonnHarmon ClarkenGrant ChennnNarratornDan Brodsky-ChenfeldnnTalentnDan skydiving: Brad PattersonnJames Skydiving: Dalten KadownDan’s Girlfriend: Adriana Zyskowski nDan Hospital: Jalil HoussainnDoctor: Joe Galligan nnMusicn“Sun” by Nick Rice » https://soundcloud.com/nickricen“Observation Wheel” by Jacob Montague » http://jacobmontaguemusic.com/n“Unheard Parade” by Jacob MontaguennSpecial ThanksnEstee & Shimon SharonnLive UnboundersnSkydive PerrisnDan Rice from People are AwesomenJustin Pelkowski nClaire DegenhardtnAica Vera Valdez Less
A maiden flight of Walkera's highly anticipated 2015 quadcopter, the Voyager 3. Test flight went great, completed precision high speed circ...
A maiden flight of Walkera's highly anticipated 2015 quadcopter, the Voyager 3. Test flight went great, completed precision high speed circuits and maneuver tests. The is a prototype, so what you see may not be what you get! This prototype did not carry a 4k camera. :) The Voyager 3 reminds me of the QR x800, you can almost say this is the sports model of the x800, with a new dashboard. It might just be the model for fiming sport events, a car chase or a ski competition. Latest updates at http://iuasinc.com the UAS division of Walkera. The unbox video at https://youtu.be/lwh8T3jl0rI Design http://forum.flitetest.com/showthread.php?17230-Voyager-3-a-first-look-at-the-APM-design-and-flight-test Team Uni Narrators: Kate, Edy Test Pilots: Ryan, Chris & Leo Specifications: GPS and GLONASS dual-navigation system (http://en.wikipedia.org/wiki/GLONASS) APM Copter, Modular Component Design: APM, BT, Telemetry 4K camera Detachable and unrestricted 360°gimbal LiPo size: 8s 29.6V 3000MAH * 2 in series 20-25 minutes flight time Epic Music: Barlow-Daydreams A DroneMission.com Project Less
NEW: Quad-Copter hover jet and golden jetpack! I'm going to be testing prototypes for new Innovation tech here! Warning: Not everything here...
NEW: Quad-Copter hover jet and golden jetpack! I'm going to be testing prototypes for new Innovation tech here! Warning: Not everything here will be finished, and it may be buggy!nSpecial... Less
More thoughts on my quad copter experience. Switching to Naze32. Changing the ESC' and transmitter. The crash! Early days with GPS. Question...
More thoughts on my quad copter experience. Switching to Naze32. Changing the ESC' and transmitter. The crash! Early days with GPS. Questions. Is there a way of sending out the 3 position... Less
After a pretty rough quad copter crash, I noticed my new Hero4's screen would not turn on any more. This video is a teardown and repair.. sa...
After a pretty rough quad copter crash, I noticed my new Hero4's screen would not turn on any more. This video is a teardown and repair.. saving me $300 from sending it back to GoPro. Less
Amazing fighter quad copter that destroyed the airbase, navel base and tanks
I had upgraded the antennas on both my Phantom and transmitter and was looking to get in some long range flying. This was my first flight of...
I had upgraded the antennas on both my Phantom and transmitter and was looking to get in some long range flying. This was my first flight of the day and in it, I almost lost my copter. Less
Windy evening after a few days of ice and snow, flew my quad copter around to see what I could see. Made it home safe with frozen fingers. T...
Windy evening after a few days of ice and snow, flew my quad copter around to see what I could see. Made it home safe with frozen fingers. Temps dropping from 30 this morning to zero tonight.... Less
We fly remote controlled, camera-equipped copters which provide an aerial perspective that will captivate and delight your audience. These s...
We fly remote controlled, camera-equipped copters which provide an aerial perspective that will captivate and delight your audience. These small, highly maneuverable craft can fly at low altitudes... Less
Auto in waypoint mode, second iterance with biger area. Strong cold wind. Pixhawk hardly mounted on top of the frame. I missed the moment wh...
Auto in waypoint mode, second iterance with biger area. Strong cold wind. Pixhawk hardly mounted on top of the frame. I missed the moment when copter have started to fall and didn't cought... Less
Here's a little success story of the power of the Blender Network.nThe Blender Network is a place for Blender professionals, freelancers, st...
Here's a little success story of the power of the Blender Network.nThe Blender Network is a place for Blender professionals, freelancers, studios, developers to market their services, as well as the place to go for clients who need professional Blender power and support.nRecently I was contacted by Francesco Siddi, who runs the website and manages requests. He forwarded me a request by a client, Logan Gilpin, who needed a special tracking service. nBasically he needed equirectangular stabilization.nHe is taking footage with several cameras mounted on a quadrocopter which he then stitches together with an app called VideoStitch (http://www.video-stitch.com). The resulting 10k footage is crisp and clear, however quite shaky, due to movements and vibrations of the copter.nWhat he wanted is to stabilize it so that he can map the stable footage onto a sphere, put a virtual camera inside of it so that he can have all control over the viewing angle and focus if the entire sequence.nSince he didn't find any other solution he wanted to do it in Blender, but needed support with that.nnSo I tried several things. Tracking was not an issue at all. Getting a correct equirectangular stabilization was a bit more tricky though. I tried to use a setup of different constraints to stabilize it, but I was missing an important thing, which is the correct mapping of the equirectangular coordinates.nSo I decided to reach out for help myself. I asked Dalai Felinto, who is also part of the Blender Network and who has worked a lot with equirectangular mappings and used the Blender Game Engine for dome projections. And he was pretty confident that he could solve the problem. But he said that it might be the easiest to write an add-on for that. Just 1 day later he presented me a great solution that works great and is easy to use.nThanks to the flexible Interface of Blender it was easy to implement the functions into the UI of the Tracking Module of Blender.nSo it works like this:nPut your footage into the Movie Clip Editor and track 2 points on the horizon. nMark the points as Focus and Target. Then click the button to create the stabilized camera. If you open the rendered viewport now you can see the stabilized footage. nJust render out the sequence and you can then use it as a stabilized background in another scene or for whatever you like.nSo thanks to the Blender Network and Dalai's help I could prepare a tutorial and workflow guideline for the client so that he can now finish is project with Blender. Less
Removing the landing gear only saved 3.6 kg or six bottles of beer. It would have liftet 55.1 kg anyway.
The SparkFun Autonomous vehicle competition is an annual race between home-made autonomous vehicles. This year SparkFun held its annual Auto...
The SparkFun Autonomous vehicle competition is an annual race between home-made autonomous vehicles. This year SparkFun held its annual Autonomous Vehicle Competition at the Boulder Reservoir. CHeck out all the action!nnMore information: https://www.sparkfun.com/news/1185 Less
This is a pre event that happend in france, organized by airgonay, a quadcopter racing fanatic association. Drones are not only for spying o...
This is a pre event that happend in france, organized by airgonay, a quadcopter racing fanatic association. Drones are not only for spying or doing the headlines when they fall in the streets. nFollow us on facebook: www.facebook.com/airgonaynnpictures : www.wooloomooloo.comnnthx for your support! Less
Your message has been sent. We will get back to you in 24 hours. Thank you.
Close
Found a bug?SuggestionsCopyrightNeed help?Business DevelopmentGeneral inquiry
Email address (optional):
A message is required
Message (required):
Send Message Cancel
